Skip to content

How to Power Identix Devices Safely

Damage from voltage surges usually can be avoided, but it still causes significant losses each year. What are voltage surges? Simply stated, they are disturbances in the normal pattern of a power system’s supply voltage, caused by circuit switching or by the environment.

Circuit switching surges happen when a sudden change to an electrical circuit occurs. That may be due to equipment use, changes in utility power supply, or damaged power lines. Arcing caused by loose connections or ground faults are other causes. The most evident environmental surge is lightning. Although people often discuss lightning and voltage surges as two distinct phenomena, lightning is in fact one type of surge.

The simplest way to protect Identix electronic equipment is to use surge suppression devices and make sure all equipment is properly grounded. To be effective, the grounding system must be continuous, and there should be only one grounding system.

For devices that require an external DC power supply, connect the device to its power supply first, and only then connect the power supply to the electrical outlet. This prevents arcing that could damage the equipment.