What are the Power Requirements for USB-Powered Devices?
USB powering options for Identix readers and gateways
Section titled “USB powering options for Identix readers and gateways”Devices that accept USB power can be supplied via:
- A USB port on a host computer
- A powered USB hub (with its own external supply)
- A dedicated USB power adapter (“power brick”)
Stable DC power is critical to the proper operation of Identix IoT gateways. Host-computer USB ports often have limited current capacity. If a USB data link is required and the host port cannot supply enough power, use a powered USB hub to feed the gateway.
When data communication is exclusively over Wi-Fi, use a dedicated USB power adapter.
Typical current consumption
Section titled “Typical current consumption”The table below shows typical current consumption for devices that can be powered via USB.
| RF power (dBm) | Continuous inventory, average current (A) | Peak current (A) | Typical module temperature (°C) | Cycled inventory (50% duty cycle), average current (A) | Peak current (A) | Typical module temperature (°C) |
|---|---|---|---|---|---|---|
| 0 | 0.2 | 0.3 | 40 | 0.2 | 0.3 | 40 |
| 7 | 0.5 | 0.7 | 50 | 0.4 | 0.7 | 42 |
| 10 | 0.5 | 0.7 | 50 | 0.4 | 0.7 | 42 |
| 15 | 0.6 | 0.7 | 52 | 0.4 | 0.6 | 42 |
| 23 | 0.6 | 0.9 | 56 | 0.5 | 0.9 | 46 |
| 27 | 0.7 | 1.1 | 65 | 0.6 | 1.1 | 50 |
| 30 | 0.78 | 1.25 | 72 | 0.68 | 1.25 | 53 |